New Industrial 40" Wood Lathe. This wood lathe features a 110V 350 watt single phase motor, with 40" of cutting feed. It has 4 quick change speeds for roughing, cutting, fine cutting, and finishing.

The bed is made out of heavy steel tubing, and the rest of the tool is made with heavy cast iron.

Specifications:

• Construction - Headstock, tailstock, foot, tool rest base and tool rest of heavy cast iron. Bed is of heavy steel tubing.

  Headstock . The outboard end of the drive spindle can also be used for large turning and is threaded ¾.16 left hand. The pulley system and motor are mounted to the headstock.

  Tailstock - Slides along the full length of bed and clamps positively at any distance from drive spindle. The ram has a hand wheel advance of 2 3/8 inches with positive lock and is fitted with a Morse taper

  120 Volt

  Frequency - 60 Hz

  Maximum Length Of Cutting Feed - 40 inch (1000 mm)

  Max. Diameter - 14-1/4" (365 mm)

  Height Of Cutting Tool - 7" (178 mm)

  Motor Power - Single Phase 350 Watts

  Spindle speed - 4 speeds

  Turning Capacity - 356mm (14 inches) max diameter over bed. 1000mm (40 inches) max between centers

  Pulley system - 4 speed V belt

  Spindle speeds - 1100, 1600, 2300, 3400 rpm

  Motor - 350W, 1400 rpm, AC 110V, 50/60 Hz