Product Features: Tool designed for replacing rear axle bonded rubber mounting bushing(s) while on car without need for removing rear axle assembly

Blackened oxide finish to resist corrosion

Bearing assisted force nut for ease and longevity of tool

Tool allows the bush to be fitted quickly and easily without causing damage while axle still on vehicle

For use on Audi A3

For use on VW Golf IV

For use on Bora 1.4/1.6/1.8/2.0 and 1.9D(2001~2003)

Tool used for removal and installation

Blow molded plastic

 

Recommended Instructions of use: Step 1: Securely support the vehicle with jack stands or frame lift, then remove the rear wheels per factory manual

Step 2: Remove both front mounting bolts from the rear axle mounting bracket

Step 3: Pull the front end of the trailing arm down the mounting bracket and wedge into position, using a solid object between the arm end and the underside of the vehicle.

Step 4: Mark the exact position in the arm of the rubber mounting

Step 5: Remove the old mounting bush from the trailing arm

Step 6: Lubricate the screw threads of the tool

Step 7: Align the Y mark on the new bush with the mark on the axle trailing arm

Step 8: Assemble the bush suspension tool and insert the new bonded mounting into position, adapter is lipped and designed to sit flush against the trailing arm

Step 9: With a 24mm socket on ratchet slowly turn the thrust bearing to pull the new mounting into the rear axl

Step 10. Re-assemble and Repeat steps 3-9 for the other side Brand: PMD Products